This 0.627-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, ideal for robust hydraulic systems. Precisely manufactured for critical component fabrication.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.627" |
| Length | 26" |
| Width | 14" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet (0.627" thickness, 26" length, 14" width) provides exceptional performance in high-pressure hydraulic environments. Its austenitic structure (Type 304) ensures excellent weldability and formability, while offering superior resistance to a broad spectrum of corrosive media, including water, various acids, and alkaline solutions. This material's inherent strength and dimensional stability make it the material of choice for fabricating pump housings, valve bodies, manifold blocks, and other critical hydraulic components where reliability and longevity are paramount. Meets ASTM A240 standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against design specifications. 2. Prepare edges for cutting or machining according to fabrication drawings. 3. Fabricate component using appropriate machining and welding processes for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication, leading to excessive heat and potential material degradation. | Utilize high-speed steel or carbide cutting tools with ample coolant and controlled feed rates to manage heat and ensure clean cuts. |
| Improper welding techniques leading to sensitization and reduced corrosion resistance in the heat-affected zone. | Employ low-hydrogen welding consumables and maintain interpass temperatures below 300°F (150°C) to minimize sensitization. Post-weld cleaning and passivation are crucial. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Pump and Valve Housings, Hydraulic Cylinder Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||