This robust Nylon stock sheet is engineered for critical hydraulic systems. Its exceptional strength and durability ensure reliable performance under demanding operational conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.623" |
| Length | 39" |
| Width | 25" |
A high-performance industrial component, this Nylon stock sheet offers a substantial 0.623" thickness, ideal for applications requiring significant load-bearing capacity and impact resistance. Measuring 39" in length and 25" in width, it provides ample material for custom fabrication. The inherent properties of Nylon, including excellent wear resistance, low coefficient of friction, and good chemical resistance, make it a superior choice for hydraulic seals, wear pads, and structural components within hydraulic machinery. Its dimensional stability ensures consistent performance across a range of operating temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and machining of the Nylon stock sheet are performed to the exact specifications required for the hydraulic component. 2. Thoroughly clean all mating surfaces to remove any debris or contaminants that could compromise seal integrity or operational smoothness. 3. Install the fabricated Nylon component within the hydraulic system, adhering to all manufacturer torque and assembly guidelines.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without appropriate lubrication or cooling, leading to melting or poor edge quality on the Nylon. | Employ high-speed steel or carbide cutting tools with adequate coolant and lubrication to prevent overheating and ensure clean, precise cuts. |
| Over-tightening fasteners during installation, which can lead to stress cracking or deformation of the Nylon component. | Utilize torque wrenches to adhere to specified torque values, preventing excessive pressure on the Nylon material and ensuring its longevity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Pads and Bushings, Guide Elements in Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||