This high-strength carbon steel stock sheet, measuring 0.622" thick by 47"x28", is engineered for robust performance in demanding heating and cooling systems. Its material properties ensure excellent durability and thermal transfer efficiency.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.622" |
| Length | 47" |
| Width | 28" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet provides exceptional dimensional stability for critical HVAC components. The 0.622-inch thickness offers substantial structural integrity and thermal mass, ideal for heat exchangers, ductwork supports, and furnace casings. Composed of high-carbon steel, it exhibits excellent weldability and formability, allowing for custom fabrication in diverse heating and cooling system designs. Its inherent strength resists deformation under thermal stress and mechanical load, ensuring long-term operational reliability and efficient heat transfer.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean, dry, and free of debris. 2. Carefully position the carbon steel stock sheet according to the design specifications. 3. Secure the sheet using appropriate welding, bolting, or riveting techniques, ensuring a tight and leak-proof fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation before welding. | Thoroughly clean and bevel all edges to be welded to ensure proper fusion and prevent weld defects. |
| Overheating the material during fabrication, leading to warping or material property changes. | Utilize controlled heat input and consider preheating and post-weld heat treatment if necessary to maintain material integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heat Exchanger Fabrication, HVAC Ductwork Supports, Furnace and Boiler Casings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||