This high-performance Nylon stock sheet, measuring 0.620" thick, 32" in length, and 18" in width, is engineered for demanding heating and cooling applications. Its robust material properties ensure reliable thermal management and structural integrity.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.620" |
| Length | 32" |
| Width | 18" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a substantial 0.620" thickness, providing excellent dimensional stability and load-bearing capacity. The inherent properties of Nylon, such as its high tensile strength, excellent wear resistance, and good thermal insulation, make it ideal for components within heating and cooling systems. Its resistance to moisture and many chemicals further enhances its suitability for environments where environmental factors can be challenging. The 32" x 18" dimensions offer a versatile sheet size for custom fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate industrial cutting tools. 2. Secure sheet using mechanical fasteners designed for Nylon or appropriate adhesive bonding agents. 3. Ensure proper ventilation and thermal isolation as per system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade selection, leading to chipping or melting. | Utilize carbide-tipped blades or specialized routers designed for plastics to achieve clean cuts and prevent material degradation. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ washers to distribute load and tighten fasteners to the recommended torque specifications for Nylon to avoid damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC duct insulation liners, Thermal barrier components, Fan shroud fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||