This industrial-grade nylon stock sheet offers exceptional durability and wear resistance. Precisely manufactured to 0.620" thickness, it's ideal for custom fabrication and high-stress mechanical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.620" |
| Length | 28" |
| Width | 25" |
Specified by design engineers worldwide, this 0.620" thick Nylon Stock Sheet is engineered for superior performance in demanding environments. Measuring 28" in length and 25" in width, its inherent properties include excellent tensile strength, low coefficient of friction, and high impact resistance. This makes it an optimal choice for wear pads, bushings, gears, and specialized tooling where abrasion and mechanical stress are significant factors. Its machinability allows for intricate custom part creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired dimensions on the nylon sheet. 2. Utilize appropriate cutting tools (e.g., industrial saws, routers) for precise fabrication. 3. Smooth all cut edges to prevent snagging or premature wear during operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ sharp, carbide-tipped blades specifically formulated for cutting nylon to ensure clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the nylon. | Use washers and avoid excessive torque when securing nylon components; allow for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guides, Gears and Sprockets, Chute Liners, Tooling Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||