This 0.619-inch thick Nylon stock sheet is engineered for demanding Heating & Cooling applications. Its robust composition provides exceptional durability, chemical resistance, and impact absorption.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.619" |
| Length | 40" |
| Width | 45" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise thickness of 0.619 inches, a length of 40 inches, and a width of 45 inches. Engineered from high-performance Nylon, it offers superior tensile strength, excellent abrasion resistance, and good thermal stability, making it ideal for components exposed to varied environmental conditions and mechanical stress within HVAC systems. Its inherent lubricity and low coefficient of friction further enhance its suitability for moving parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut material using compatible fasteners or adhesives, ensuring a stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to uneven edges and potential stress points. | Utilize sharp, industrial-grade cutting tools specifically designed for plastics to ensure clean, precise cuts. |
| Improper fastening, causing the sheet to loosen or deform under operational stress. | Employ fasteners or adhesives rated for the specific environmental conditions and load requirements of the HVAC application. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Ductwork insulation and lining, Component spacers and supports, Gaskets and seals in air handling units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||