This premium carbon steel stock sheet is engineered for superior strength and durability in high-stress pulling and lifting operations. Its substantial dimensions and robust material composition ensure reliable performance under extreme loads.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 28" |
| Width | 18" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a precise 0.617" thickness, a substantial 28" length, and an 18" width. Constructed from high-grade carbon steel, it offers exceptional tensile strength, yield strength, and hardness, making it ideal for fabricated components in heavy-duty pulling and lifting equipment. The material's inherent toughness and resistance to deformation ensure longevity and safety in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly before welding or fastening. 2. Ensure proper alignment with mating components. 3. Securely fasten or weld according to load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to weak welds. | Thoroughly degrease and remove all mill scale or rust from surfaces prior to any welding or fastening. |
| Overlooking load calculations for the fabricated component. | Always consult engineering drawings and perform precise load calculations to ensure the stock sheet is appropriately utilized within its design parameters. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of lifting lugs and eye bolts, Reinforcement plates for winches and hoists, Structural components for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||