This robust 0.610-inch thick carbon steel stock sheet, measuring 48 inches by 33 inches, is engineered for demanding pulling and lifting tasks. Its substantial gauge provides exceptional strength and resilience.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.610" |
| Length | 48" |
| Width | 33" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.610 inches, a length of 48 inches, and a width of 33 inches. The inherent tensile strength and yield strength of carbon steel make it ideal for high-stress environments. This material offers excellent weldability and formability, crucial for custom fabrication in heavy-duty pulling and lifting equipment, structural reinforcement, and industrial machinery components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Position the sheet accurately according to the fabrication or assembly drawing. 3. Securely fasten or weld the sheet in place using appropriate industrial methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge sheet for applications exceeding its load capacity. | Always verify the required load capacity and select a stock sheet with a sufficient thickness and material grade to safely meet those demands. |
| Improper welding or fastening techniques leading to structural failure. | Utilize welding procedures and fasteners rated for the specific carbon steel grade and intended application loads. Consult engineering specifications for best practices. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch and hoist components, Structural reinforcement for industrial machinery, Custom fabrication of pulling and lifting fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||