Engineered for demanding hydraulic applications, this premium brass stock sheet provides exceptional corrosion resistance and mechanical integrity. Its precise dimensions ensure seamless integration into complex systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.603" |
| Length | 15" |
| Width | 36" |
Built to exacting engineering tolerances, this 0.603" thick brass stock sheet offers a nominal composition of approximately 60% copper and 40% zinc, providing excellent machinability and superior resistance to a wide range of hydraulic fluids and environmental factors. The dimensions of 15" x 36" are manufactured to strict dimensional stability standards, ensuring consistent performance and reliability in high-pressure hydraulic circuits, manifold blocks, and specialized fluid power components where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the brass stock sheet is clean and free of contaminants. 2. Accurately machine the sheet to the required component dimensions using appropriate tooling. 3. Integrate the machined component into the hydraulic system, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining speeds and feeds for brass, leading to tool wear or poor surface finish. | Consult machining data for free-machining brass alloys to determine optimal cutting parameters for superior accuracy and finish. |
| Improperly cleaning the brass surface before assembly, leading to contamination in hydraulic lines. | Thoroughly degrease and clean all surfaces of the brass component before installation to prevent particulate contamination. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Custom Hydraulic Components, Fluid Power Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||