This robust nylon stock sheet, measuring 0.602" thick, 23" long, and 22" wide, offers exceptional durability and low friction. Engineered for demanding industrial applications, it provides superior wear and impact resistance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.602" |
| Length | 23" |
| Width | 22" |
Manufactured under strict quality controls, this nylon stock sheet exhibits a nominal thickness of 0.602 inches, a length of 23 inches, and a width of 22 inches. Nylon's inherent properties include excellent tensile strength, good chemical resistance to oils and solvents, and superb abrasion resistance. Its dielectric strength makes it suitable for electrical insulation, while its low coefficient of friction facilitates smooth operation in sliding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the cut nylon component to the intended substrate using compatible fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without appropriate blade geometry, leading to chipping or melting. | Utilize specialized carbide-tipped saw blades or routers designed for cutting plastics, ensuring proper feed rates and cooling to prevent thermal degradation. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the nylon sheet. | Employ washers to distribute fastener pressure and torque fasteners to manufacturer recommendations for plastics, avoiding excessive clamping force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and bushings, Electrical insulators, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||