This robust Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction, making it a superior choice for demanding hydraulic component manufacturing and repair.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.597" |
| Length | 28" |
| Width | 13" |
Engineered for reliability and performance, this 0.597-inch thick Nylon stock sheet (28-inch length, 13-inch width) provides excellent mechanical strength, impact resistance, and a broad operating temperature range. Its inherent lubricity and chemical inertness make it ideal for applications exposed to hydraulic fluids and abrasive environments. This material is readily machinable, allowing for precise fabrication of seals, bearings, bushings, and wear pads within complex hydraulic systems, ensuring extended service life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required component dimensions using appropriate machining tools. 2. Machine to final tolerances, ensuring smooth surfaces and critical feature integrity. 3. Install the fabricated Nylon component into the hydraulic system, adhering to all design specifications and torque requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining speeds leading to excessive heat buildup and material degradation. | Utilize appropriate cutting speeds and feeds for Nylon, employing coolant if necessary to manage thermal expansion and prevent melting. |
| Over-tightening fasteners, causing stress concentration and potential cracking in the Nylon component. | Apply manufacturer-recommended torque specifications for fasteners securing Nylon parts, or use appropriate washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Bushings, Fluid Transfer Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||