This robust carbon steel stock sheet, specifically engineered for demanding pressure and temperature control systems, offers exceptional durability and structural integrity. Its substantial thickness ensures reliable performance in critical environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.592" |
| Length | 46" |
| Width | 34" |
Manufactured under strict quality controls, this 0.592-inch thick carbon steel stock sheet (46" x 34") is designed for superior performance in high-pressure and elevated-temperature applications. Its high tensile strength and ductile properties make it ideal for fabricating robust components, including pressure vessel heads, heat exchanger shells, and critical piping systems. The material's inherent resistance to deformation under stress ensures long-term operational reliability and safety in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the specific application environment. 2. Ensure proper cutting and shaping techniques are employed to maintain material integrity. 3. Implement approved welding or joining procedures suitable for high-strength carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for pressure containment. | Always select material thickness based on calculated design pressures and relevant industry codes (e.g., ASME Boiler and Pressure Vessel Code). |
| Inadequate pre-heating or post-weld heat treatment. | Consult material specifications and welding procedures for recommended heat treatments to prevent embrittlement and residual stresses. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Construction, High-Temperature Piping Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||