This robust 0.591" thick Nylon stock sheet is engineered for critical pressure and temperature control applications. Its exceptional material properties ensure reliability and longevity in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.591" |
| Length | 18" |
| Width | 21" |
Manufactured under strict quality controls, this 0.591" thick Nylon stock sheet offers superior mechanical strength and thermal stability. The dimensions of 18" in length and 21" in width provide ample material for fabrication. Nylon's inherent resistance to abrasion, chemicals, and moisture makes it ideal for seals, gaskets, valve components, and insulating barriers in systems subjected to moderate to high pressures and fluctuating temperatures. Its excellent dielectric properties further enhance its utility in electrical insulation applications within these control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon sheet is cut precisely to the required dimensions using appropriate cutting tools. 2. Clean both mating surfaces thoroughly to remove any debris or contaminants. 3. Install the fabricated Nylon component, applying consistent and even pressure as per system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using non-specified cutting tools that can cause delamination or uneven edges. | Utilize sharp, industrial-grade cutting tools specifically designed for plastics to achieve clean and precise cuts. |
| Installing with residual contaminants on mating surfaces, leading to premature wear or leaks. | Implement a rigorous cleaning protocol for all surfaces that will interface with the Nylon component before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure sealing components, Temperature-resistant gaskets and washers, Insulating barriers in control manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||