This brass stock sheet is engineered for demanding hydraulic applications. Its precise dimensions and superior brass composition ensure optimal performance and longevity in fluid power systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 18" |
| Width | 24" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.588" thickness, ideal for high-pressure hydraulic components requiring robust structural integrity. Manufactured from high-grade brass, it offers excellent machinability for intricate component fabrication, superior corrosion resistance against a wide range of hydraulic fluids, and good thermal conductivity. The 18" x 24" dimensions provide ample material for manufacturing critical hydraulic manifold blocks, valve bodies, pump housings, and custom fittings where dependable operation is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before cutting or machining. 2. Utilize appropriate cutting tools and techniques for brass to achieve precise dimensions. 3. Apply lubrication during machining to prevent tool wear and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper setup, leading to poor edge quality. | Employ carbide-tipped or high-speed steel tooling specifically designed for non-ferrous metals like brass. Adjust feed rates and speeds appropriately. |
| Inadequate deburring after cutting, leaving sharp edges that can compromise sealing surfaces. | Thoroughly deburr all cut edges using a deburring tool or file, ensuring a smooth and consistent profile. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Blocks, Valve Bodies and Components, Custom Hydraulic Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||