This premium brass stock sheet is engineered for demanding pressure and temperature control systems. Its robust brass composition ensures exceptional durability and reliable performance under extreme conditions.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.586" |
| Length | 40" |
| Width | 31" |
Manufactured under strict quality controls, this 0.586-inch thick brass stock sheet measures 40 inches in length and 31 inches in width. Composed of a high-grade brass alloy, it exhibits excellent thermal conductivity, corrosion resistance, and machinability, making it ideal for components requiring precise dimensional stability and resilience in varied operating environments. Its specific alloy composition ensures consistent performance across a wide temperature range and under moderate pressure loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Precisely cut or machine the brass to the required dimensions for the control component. 3. Integrate the fabricated brass part into the pressure or temperature control assembly, adhering to all system specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade brass that may not withstand the intended pressure or temperature. | Always verify the brass alloy specifications to ensure it meets or exceeds the requirements of the pressure and temperature control application. |
| Inadequate cleaning of the sheet prior to machining, leading to tool wear and poor surface finish. | Thoroughly degrease and clean the brass stock sheet before any cutting, stamping, or forming operations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator components, Temperature sensor housings, Valve bodies for control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||