This robust carbon steel stock sheet is engineered for demanding pressure and temperature control applications. Its substantial thickness and precise dimensions ensure reliable performance in critical systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.582" |
| Length | 19" |
| Width | 13" |
Built to exacting engineering tolerances, this carbon steel stock sheet measures 0.582 inches in thickness, 19 inches in length, and 13 inches in width. Composed of high-quality carbon steel, it offers superior strength, rigidity, and resistance to thermal expansion, making it ideal for components within pressure vessels, heat exchangers, and high-temperature fluid handling systems where consistent material integrity is paramount. Its dense microstructure and predictable deformation characteristics are vital for maintaining sealing integrity and structural soundness under extreme operational stresses.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any defects or damage before proceeding. 2. Precisely cut the sheet to the required dimensions for the specific component. 3. Prepare mating surfaces for welding or fastening according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade material for pressure containment. | Always utilize stock sheets that meet or exceed the calculated material requirements for pressure and temperature ratings as per relevant engineering codes. |
| Inadequate surface preparation leading to sealing failures. | Ensure all surfaces that will be joined or sealed are meticulously cleaned, de-burred, and free of contaminants to guarantee a secure and leak-free assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature manifold construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||