This high-grade carbon steel stock sheet is engineered for demanding hydraulic applications. Its substantial 0.575" thickness and robust composition ensure superior strength and durability for critical hydraulic components.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.575" |
| Length | 43" |
| Width | 39" |
Specified by design engineers worldwide, this 0.575" thick carbon steel stock sheet offers exceptional tensile strength and yield strength, crucial for high-pressure hydraulic systems. Measuring 43" in length and 39" in width, it provides ample material for fabricating robust hydraulic manifolds, pump housings, and valve bodies. The material's inherent hardness and wear resistance ensure longevity and reliable performance in harsh operating environments, making it the preferred choice for critical hydraulic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet surface is clean and free from contaminants before fabrication. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting equipment. 3. Prepare edges for welding or machining according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade steel for hydraulic components. | Always adhere to specified material grades and thicknesses to ensure system integrity and prevent catastrophic failure. |
| Inadequate surface preparation before fabrication. | Thoroughly clean the carbon steel sheet to remove any oil, grease, or debris that could compromise weld quality or dimensional accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Heavy-Duty Hydraulic Cylinder Components, Pump and Valve Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||