Engineered for demanding environments, this 0.573" thick carbon steel stock sheet offers superior strength for critical pulling and lifting operations. Its substantial dimensions ensure maximum surface contact and load-bearing capacity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.573" |
| Length | 36" |
| Width | 35" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.573 inches, a length of 36 inches, and a width of 35 inches. Crafted from high-grade carbon steel, it exhibits exceptional tensile strength and durability, making it inherently resistant to deformation under heavy loads. This material's inherent toughness is crucial for applications where repeated stress and impact are expected, ensuring reliable performance in extreme conditions. Its robust composition is ideal for fabrication into custom rigging components, structural supports for lifting equipment, and reinforcement plates in heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area for installation is clean, dry, and free of contaminants. 2. Position the carbon steel stock sheet according to the design specifications, ensuring proper alignment with mounting points. 3. Secure the stock sheet using appropriate high-strength fasteners, torqued to manufacturer recommendations for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners with a shear and tensile strength rating that exceeds the expected load on the stock sheet. Consult engineering drawings for specific fastener requirements. |
| Inadequate surface preparation leading to stress concentrations. | Thoroughly clean and de-grease the mounting surfaces to ensure even load distribution and prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting lugs and brackets, Reinforcement plates for heavy-duty machinery bases, Structural components in industrial cranes and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||