This 0.565" thick carbon steel stock sheet, measuring 38" x 37", is a foundational component for high-pressure hydraulic applications. Its robust material composition ensures exceptional durability and resistance to wear in demanding environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.565" |
| Length | 38" |
| Width | 37" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.565-inch thickness, providing superior structural integrity for critical hydraulic components. Measuring 38 inches in length and 37 inches in width, it offers ample material for custom fabrication of hydraulic manifolds, pump housings, and valve bodies. The inherent strength and ductility of carbon steel make it ideal for applications subjected to high stresses and operating pressures, ensuring long-term service life and preventing premature failure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to precise dimensions required for the specific hydraulic component. 2. Machine surfaces to achieve required tolerances for sealing and assembly. 3. Weld or fasten securely as per hydraulic system design specifications, ensuring all connections are leak-proof.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient material thickness for high-pressure hydraulic circuits. | Always verify material thickness requirements against system pressure ratings and component stress calculations. |
| Inadequate surface finishing leading to seal failures. | Ensure machined surfaces meet specified roughness parameters (e.g., Ra values) to guarantee effective sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Pump & Motor Housings, Heavy Equipment Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||