This robust carbon steel stock sheet is specifically designed for critical hydraulic system components. Its substantial thickness and durable material provide the necessary strength and resilience for high-pressure environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.560" |
| Length | 44" |
| Width | 21" |
Engineered for reliability and performance, this 0.560" thick carbon steel stock sheet is manufactured to meet stringent industrial standards for hydraulic applications. Measuring 44" in length and 21" in width, it offers a substantial surface area for fabricating robust components such as cylinder bodies, manifolds, and structural supports. The inherent tensile strength and yield strength of carbon steel ensure exceptional durability under extreme pressures and operational stresses, minimizing the risk of deformation or catastrophic failure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Precisely cut and machine the sheet according to engineered designs for hydraulic components. 3. Integrate the fabricated component into the hydraulic system, ensuring proper sealing and connection points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel not suited for hydraulic pressures. | Always select carbon steel with documented mechanical properties suitable for the intended hydraulic system's operating pressures and temperature ranges. |
| Inadequate surface preparation leading to premature corrosion. | Thoroughly clean and degrease the sheet before fabrication and ensure appropriate protective coatings are applied after machining, especially in corrosive environments. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Cylinder Construction, Hydraulic Manifold Fabrication, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||