This robust 0.559-inch thick carbon steel stock sheet is engineered for demanding pulling and lifting applications. Its substantial dimensions and durable material ensure reliable performance in industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.559" |
| Length | 17" |
| Width | 39" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.559 inches, a length of 17 inches, and a width of 39 inches. Constructed from high-grade carbon steel, it offers exceptional tensile strength and yield strength, making it ideal for high-stress environments. Its inherent toughness and resistance to deformation ensure longevity and safe operation when subjected to heavy loads. Ideal for fabricating custom rigging components, reinforcement plates, and structural elements in pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the stock sheet accurately according to the design specifications. 3. Securely fasten the stock sheet using appropriate hardware (e.g., heavy-duty bolts, welds) rated for the intended load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners. | Always utilize fasteners specifically rated for the maximum anticipated load and compatible with the carbon steel material. |
| Inadequate surface preparation before mounting. | Thoroughly clean and degrease the mounting area to ensure optimal adhesion and prevent corrosion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom rigging component fabrication, Reinforcement plates for lifting gear, Structural elements in winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||