This heavy-duty brass stock sheet, measuring 0.555" thick, 34" long, and 19" wide, is engineered for superior performance in pulling and lifting systems. Its robust brass composition ensures longevity and reliability under stress.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.555" |
| Length | 34" |
| Width | 19" |
Built to exacting engineering tolerances, this brass stock sheet offers a substantial 0.555" thickness, providing exceptional load-bearing capacity. The 34" x 19" dimensions allow for versatile fabrication into custom components for winches, pulleys, and lifting mechanisms. The inherent properties of brass, including excellent corrosion resistance and non-sparking characteristics, make it ideal for environments where safety and durability are paramount. Its machinability ensures precise integration into complex assemblies, meeting the rigorous demands of industrial pulling and lifting operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity against project specifications. 2. Prepare mounting surfaces to ensure flatness and adequate support. 3. Securely fasten the brass sheet using appropriate hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not adequately distribute the load. | Employ fasteners rated for the expected tensile and shear loads, and use washers to spread the force. |
| Allowing sharp edges or burrs to create stress concentration points. | Deburr and chamfer all edges to promote smooth stress flow and prevent premature material failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom pulley fabrication, Winch drum construction, Reinforcement plates for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||