This robust brass stock sheet, precisely machined to 0.552" thickness, is engineered for high-stress pulling and lifting applications. Its inherent strength and corrosion resistance ensure reliable performance in challenging industrial environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.552" |
| Length | 13" |
| Width | 13" |
Engineered for reliability and performance, this brass stock sheet boasts a substantial 0.552" thickness, providing exceptional structural integrity for demanding pulling and lifting operations. Composed of a high-strength brass alloy, it exhibits superior tensile strength and resistance to fatigue, crucial for components subjected to repetitive stress. The 13" x 13" dimensions offer ample surface area for fabrication into various lifting and pulling mechanisms, including sheaves, pulleys, and custom rigging components. Its non-sparking properties also make it suitable for environments where ignition sources must be mitigated.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage prior to fabrication. 2. Fabricate into the required component using appropriate machining and forming techniques. 3. Integrate the fabricated component securely into the pulling or lifting system, ensuring all load-bearing connections are validated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade material for high-load applications. | Always select a brass stock sheet with specifications that exceed the calculated maximum load requirements for the intended application. |
| Improper surface preparation or finishing, leading to premature corrosion. | Ensure all cut edges and fabricated surfaces are properly deburred and, if necessary, treated or coated according to the operating environment's requirements. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom sheave fabrication for winch systems, High-strength pulley components for cranes, Durable rigging hardware for marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||