This premium 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it the optimal choice for robust heating and cooling system fabrication.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.552" |
| Length | 41" |
| Width | 35" |
A high-performance industrial component, this 0.552" thick 304 stainless steel stock sheet measures 41" in length and 35" in width. Fabricated from AISI 304 stainless steel, it exhibits excellent resistance to oxidation and a wide range of corrosive media, a critical property for components exposed to thermal cycling and diverse environmental conditions inherent in heating and cooling systems. Its high tensile strength and formability allow for precise fabrication in complex ductwork, heat exchangers, and specialized enclosures where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all surfaces are clean and free from contaminants before fabrication. 2. Utilize appropriate cutting and forming tools designed for stainless steel to maintain material integrity. 3. Securely fasten components using compatible welding or mechanical joining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material deformation or galling. | Employ high-quality carbide or diamond-tipped blades specifically designed for stainless steel cutting. |
| Inadequate surface preparation, resulting in poor weld adhesion or premature corrosion. | Thoroughly degrease and remove any mill scale or oxide layers from weld joint areas prior to joining. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: HVAC Ductwork Fabrication, Heat Exchanger Components, Industrial Oven Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||