This high-performance Nylon stock sheet provides exceptional strength, abrasion resistance, and low friction. Precisely manufactured to meet demanding industrial requirements, it's ideal for fabrication and custom component creation.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 15" |
| Width | 23" |
Built to exacting engineering tolerances, this 0.551-inch thick Nylon stock sheet measures 15 inches by 23 inches. Composed of high-grade Nylon 6/6, it exhibits excellent mechanical strength, good impact resistance, and a low coefficient of friction, making it suitable for applications involving sliding wear, vibration dampening, and electrical insulation. Its inherent chemical resistance to oils, greases, and solvents further enhances its utility in harsh operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, CNC router) designed for plastic materials to achieve precise cuts. 3. Smooth all edges using files or sanding tools to remove any burrs and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without proper blade selection. | Employ carbide-tipped blades or specialized plastic cutting bits to prevent melting and chipping. |
| Applying excessive heat during cutting or machining. | Maintain moderate cutting speeds and use coolant or air jets to dissipate heat and avoid material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Insulators and spacers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||