This robust carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its substantial thickness and dimensions provide exceptional strength and stability for critical industrial tasks.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.551" |
| Length | 13" |
| Width | 22" |
A high-performance industrial component, this carbon steel stock sheet measures 0.551 inches in thickness, with a length of 13 inches and a width of 22 inches. Fabricated from premium carbon steel, it exhibits superior tensile strength and yield strength, ensuring reliable performance under extreme loads. The material's inherent toughness resists deformation and wear, making it ideal for applications subjected to high stress and repetitive use in pulling, lifting, and structural support systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sheet for any defects or damage before installation. 2. Ensure mounting surfaces are clean, level, and capable of supporting the intended load. 3. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners. | Always use fasteners with a shear and tensile strength rating that exceeds the load capacity of the stock sheet and the application's requirements. |
| Uneven load distribution across the sheet. | Design mounting points and load application to distribute stress evenly across the entire surface area of the stock sheet to prevent localized failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch bases, Crane and hoist structural components, Industrial press plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||