This robust 0.550-inch thick nylon stock sheet offers exceptional strength and durability. Measuring 17 inches by 45 inches, it's engineered for demanding industrial environments requiring reliable performance and wear resistance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.550" |
| Length | 17" |
| Width | 45" |
Manufactured under strict quality controls, this 0.550" thick Nylon stock sheet boasts a nominal length of 17" and a width of 45". Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and good chemical inertness make it suitable for a wide array of mechanical components. Its low coefficient of friction allows for smooth operation in bearing and wear surfaces. This specific sheet provides a substantial raw material base for precision machining into custom parts, jigs, fixtures, and protective components, ensuring long service life even under heavy loads and abrasive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the nylon stock sheet using a suitable marking tool. 2. Utilize appropriate cutting equipment (e.g., industrial saw, CNC router) to achieve precise dimensions, ensuring proper blade selection for clean cuts in nylon. 3. Deburr and finish edges as required for the intended application, ensuring smooth transitions and removal of any sharp or rough areas.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to melting or chipping. | Employ carbide-tipped blades or router bits specifically designed for cutting plastics to ensure a clean and efficient cut without material degradation. |
| Insufficiently supporting the sheet during cutting, resulting in vibration and inaccurate cuts. | Ensure the nylon sheet is securely clamped and adequately supported during the entire cutting process to minimize vibration and maintain dimensional accuracy. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Gears and Sprockets, Jigs and Fixtures, Protective Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||