This robust 0.545-inch thick Nylon stock sheet is engineered for demanding pressure and temperature control applications. Its superior material properties ensure reliability and longevity in challenging industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.545" |
| Length | 28" |
| Width | 12" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.545 inches in thickness, 28 inches in length, and 12 inches in width. Exhibiting excellent tensile strength, abrasion resistance, and a broad operating temperature range, this material is ideal for components requiring high mechanical performance and resistance to moderate pressures and thermal fluctuations. Its non-porous surface and chemical inertness make it suitable for sealing, insulating, and structural applications within control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet into its designated position within the control system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard utility knife for cutting, leading to uneven edges. | Employ a sharp, industrial-grade saw or cutting tool designed for plastics to achieve precise, clean cuts. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Use appropriate torque settings and consider incorporating washers to distribute pressure evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pressure vessel liners, Thermal insulation barriers, Sealing components in fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||