This high-performance 0.532-inch thick Nylon stock sheet offers exceptional strength, wear resistance, and impact toughness. Ideal for custom fabricated parts in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.532" |
| Length | 40" |
| Width | 36" |
Manufactured under strict quality controls, this Nylon stock sheet is engineered for superior performance. Measuring 0.532" in thickness, 40" in length, and 36" in width, it exhibits excellent tensile strength, a low coefficient of friction, and superior abrasion resistance. Its inherent lubricity and resistance to chemicals make it a preferred material for gears, bearings, wear pads, and custom-machined components in the automotive, manufacturing, and material handling sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut to desired dimensions using appropriate cutting tools for nylon. 2. Machine or fabricate components according to engineering drawings. 3. Ensure all surfaces are clean and free of debris before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without proper adjustments. | Utilize sharp carbide-tipped tools designed for plastics, and maintain proper feed rates and speeds to prevent melting or chipping. |
| Over-tightening fasteners, leading to material deformation. | Employ appropriate torque specifications for nylon, considering its lower compressive strength compared to metals. Use washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gears and Sprockets, Wear Strips and Bushings, Machine Guards and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||