This 0.531" thick polycarbonate stock sheet is engineered for robust pulling and lifting applications. Its superior impact resistance and clear visibility make it ideal for demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.531" |
| Length | 34" |
| Width | 20" |
A proven choice for industrial professionals, this 0.531" thick polycarbonate stock sheet delivers exceptional performance in high-stress pulling and lifting scenarios. Measuring 34 inches in length and 20 inches in width, its high impact strength and shatter resistance significantly surpass traditional materials, ensuring operator safety and equipment longevity. The clarity of polycarbonate allows for visual inspection of components and mechanisms during operation, while its inherent toughness withstands the rigors of continuous industrial use, resisting abrasion and chemical degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Securely mount the polycarbonate sheet using appropriate industrial-grade fasteners, pre-drilling holes to prevent stress cracking. 3. Verify all connections are tight and that the sheet is properly aligned for its intended load-bearing function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Use appropriate torque settings and consider gasketed fasteners or washers to distribute pressure evenly. |
| Exposing the sheet to chemicals or solvents not compatible with polycarbonate, causing degradation or hazing. | Consult the material compatibility chart for polycarbonate and only use approved cleaning agents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for lifting equipment, Protective shields on winches and hoists, Inspection windows for dynamic load systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||