This robust 0.528-inch thick Nylon stock sheet, measuring 33" x 48", is engineered for superior performance in high-pressure hydraulic systems, offering exceptional durability and wear resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.528" |
| Length | 33" |
| Width | 48" |
Specified by design engineers worldwide, this 0.528" thick Nylon stock sheet (33" x 48") exhibits a high tensile strength and excellent impact resistance, crucial for components within demanding hydraulic environments. Its inherent lubricity minimizes friction, reducing wear on moving parts and extending service life. The material's chemical inertness ensures compatibility with a wide range of hydraulic fluids, preventing degradation. This sheet is ideal for fabricating custom seals, wear pads, and structural components requiring superior mechanical properties and dimensional stability under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling for plastics. 2. Deburr all cut edges to ensure a smooth finish and prevent material stress concentration. 3. Machining or assembly as per the specific component design, ensuring proper tolerances and fastener selection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without adjusting feed rates and speeds, leading to material melting or chipping. | Employ specialized plastic machining tools and optimize cutting parameters for Nylon to achieve clean, precise cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking of the Nylon material. | Use appropriate torque settings for Nylon components and consider using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Wear plates and bushings, Sealing elements in hydraulic manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||