This premium carbon steel stock sheet is engineered for demanding pressure and temperature control systems. Its substantial thickness and robust material properties ensure reliable performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.527" |
| Length | 18" |
| Width | 13" |
A high-performance industrial component, this carbon steel stock sheet boasts a precise thickness of 0.527 inches, a standard length of 18 inches, and a width of 13 inches. Fabricated from high-quality carbon steel, it offers exceptional tensile strength, yield strength, and hardness, making it ideal for components subjected to significant mechanical stress and thermal cycling. Its inherent durability and cost-effectiveness position it as a preferred material for fabricated parts within pressure vessels, heat exchangers, and valve bodies where integrity under adverse conditions is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants before fabrication. 2. Precisely cut to required dimensions using appropriate tooling for carbon steel. 3. Weld or fasten according to design specifications and applicable industry codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting methods that can lead to material stress or damage. | Employ plasma cutting, laser cutting, or abrasive waterjet cutting for clean, precise edges that minimize thermal distortion. |
| Inadequate surface preparation before welding, leading to poor joint integrity. | Thoroughly degrease and remove any mill scale or rust from weld areas to ensure a clean, strong bond. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||