This robust carbon steel stock sheet is engineered for demanding pressure and temperature control applications. Its substantial thickness and durable material ensure reliable performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.524" |
| Length | 30" |
| Width | 32" |
Manufactured under strict quality controls, this 0.524" thick carbon steel stock sheet measures 30" in length and 32" in width. Composed of high-grade carbon steel, it exhibits excellent tensile strength and formability, making it ideal for fabrication of components used in high-pressure vessels, heat exchangers, and critical piping systems where temperature stability and structural integrity are paramount. Its precise dimensions and material composition meet stringent industry standards for safety and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate fabrication tools. 3. Weld or mechanically fasten the prepared sheet according to engineering drawings and applicable codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or burrs. | Employ high-quality, sharp cutting tools specifically designed for carbon steel to ensure clean cuts and prevent material damage. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean and degrease the joining surfaces to remove any mill scale, rust, or contaminants that could compromise weld integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure Vessel Fabrication, Heat Exchanger Components, High-Temperature Ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||