Engineered for superior performance in demanding pulling and lifting applications, this robust Nylon stock sheet offers exceptional strength, durability, and resistance to wear and chemicals.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.522" |
| Length | 15" |
| Width | 14" |
Specified by design engineers worldwide, this Nylon stock sheet is manufactured to exacting standards, ensuring reliable performance in critical industrial operations. With a precise thickness of 0.522 inches, a substantial length of 15 inches, and a width of 14 inches, this material provides ample surface area for various fabrication needs. Its inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical inertness, make it an ideal choice for components subjected to significant mechanical stress and environmental exposure in pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon stock sheet based on required dimensions. 2. Utilize appropriate cutting tools (e.g., band saw, laser cutter) designed for plastics to achieve clean and precise cuts. 3. Smooth any rough edges with a file or sandpaper to prevent snagging and ensure proper fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can melt or chip the nylon, leading to compromised dimensions and structural integrity. | Employ tools specifically designed for cutting thermoplastics, ensuring a cool and clean cutting action. |
| Neglecting to deburr edges after cutting, which can create stress points and potential failure sites during operation. | Thoroughly deburr all cut edges to create smooth transitions and remove potential initiation points for cracks. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads for lifting slings, Guide components for pulling mechanisms, Protective liners for rigging equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||