This 0.521" thick carbon steel stock sheet is engineered for the demanding requirements of hydraulic systems. Its substantial gauge and robust material properties ensure superior structural integrity and longevity in critical fluid power applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.521" |
| Length | 39" |
| Width | 32" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a precise thickness of 0.521 inches, a length of 39 inches, and a width of 32 inches. The inherent strength and durability of carbon steel make it ideal for fabricating high-pressure hydraulic manifolds, valve bodies, and structural components. Its consistent material properties ensure reliable performance under extreme stress and fluctuating temperatures, contributing to the overall efficiency and safety of hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to precise dimensions using appropriate metalworking tools. 2. Prepare edges for welding or machining according to design specifications. 3. Fabricate components by machining, bending, or welding as required for the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inconsistent sheet material for critical hydraulic components. | Always verify sheet dimensions and material specifications meet or exceed design requirements for the intended hydraulic application. |
| Improper edge preparation leading to weld defects or structural weaknesses. | Ensure all edges are clean, free from contaminants, and prepared according to industry standards for the chosen joining method (welding, fastening). |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Valve Body Construction, Structural Supports for Hydraulic Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||