This high-quality carbon steel stock sheet, precisely measured at 0.513" thickness, 40" length, and 34" width, is engineered for demanding hydraulic systems requiring exceptional strength and resilience.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.513" |
| Length | 40" |
| Width | 34" |
Trusted by engineers across multiple sectors, this 0.513" thick carbon steel stock sheet is manufactured to exacting standards for superior performance in hydraulic applications. Its robust composition offers excellent tensile strength and yield point, making it ideal for fabricating critical hydraulic components such as manifolds, pressure vessels, and structural supports. The generous 40" x 34" dimensions provide ample material for complex designs, ensuring efficient utilization and minimizing waste in fabrication processes. This sheet is specifically chosen for its ability to withstand high pressures and corrosive environments common in hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and condition against project requirements. 2. Prepare edges and surfaces for welding or machining according to engineering drawings. 3. Fabricate and integrate the component into the hydraulic system following all relevant safety and design protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel when high-strength carbon steel is specified for high-pressure hydraulic applications. | Always confirm the material grade and specifications meet or exceed the pressure and operational demands of the hydraulic system. |
| Insufficient material preparation leading to weld defects or reduced component integrity. | Thoroughly clean and bevel edges as per welding procedure specifications, and perform necessary non-destructive testing on fabricated components. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, High-Pressure Hydraulic System Components, Structural Support for Hydraulic Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||