This high-strength carbon steel stock sheet, measuring 0.510" thick, 46" long, and 27" wide, is engineered for demanding hydraulic systems. Its robust material properties ensure exceptional performance and longevity in critical fluid power applications.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.510" |
| Length | 46" |
| Width | 27" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.510 inches, a length of 46 inches, and a width of 27 inches. The material composition, typically AISI 1018 or equivalent, provides excellent weldability and formability, along with superior tensile and yield strength crucial for high-pressure hydraulic environments. This sheet is ideal for fabricating robust hydraulic reservoirs, manifold blocks, structural components, and protective housings where reliability and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools. 3. Fabricate and weld according to hydraulic system design specifications, adhering to industry best practices for structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to burrs and dimensional inaccuracies. | Employ precision cutting equipment such as plasma cutters or abrasive saws designed for thick steel to ensure clean edges and accurate dimensions. |
| Inadequate weld preparation and procedures for high-pressure applications. | Thoroughly clean weld areas, use appropriate filler materials, and follow established welding procedures for carbon steel to achieve full penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Reservoir Fabrication, Manifold Block Construction, Structural Components for Hydraulic Systems, Protective Housings and Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||