This 0.509" thick carbon steel stock sheet, measuring 35"x46", is engineered for demanding hydraulic systems. Its robust material composition ensures exceptional strength and reliability for critical component fabrication.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.509" |
| Length | 35" |
| Width | 46" |
Trusted by engineers across multiple sectors, this 0.509" carbon steel stock sheet offers superior tensile strength and yield strength, crucial for high-pressure hydraulic environments. Its precise dimensions of 35" x 46" allow for efficient fabrication of hydraulic manifolds, valve bodies, and structural support elements. The inherent toughness of carbon steel resists deformation and wear, ensuring extended operational life and minimizing maintenance requirements in rigorous industrial settings. Verified material certifications are available upon request.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris before fabrication. 2. Utilize appropriate cutting and shaping tools designed for heavy gauge carbon steel. 3. Employ certified welding procedures for structural integrity if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel for high-pressure hydraulic components. | Always select materials specifically rated for the intended pressure and operational demands of hydraulic systems. |
| Inadequate surface preparation before fabrication. | Thoroughly clean and degrease the steel surface to ensure proper adhesion during welding or coating processes. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, High-Pressure Valve Housings, Cylinder End Caps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||