This 0.508" thick carbon steel stock sheet, measuring 35" x 13", is engineered for critical pressure and temperature control applications. Its robust material properties ensure reliability under extreme conditions.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.508" |
| Length | 35" |
| Width | 13" |
Specified by design engineers worldwide, this carbon steel stock sheet boasts a precise thickness of 0.508 inches, a length of 35 inches, and a width of 13 inches. Constructed from high-grade carbon steel, it offers excellent tensile strength, yield strength, and impact resistance, making it ideal for components subjected to significant pressure differentials and wide temperature fluctuations. Its inherent weldability and machinability facilitate integration into complex systems, while its cost-effectiveness ensures economical solutions for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity of the stock sheet against design specifications. 2. Prepare surfaces for cutting and forming according to fabrication drawings. 3. Weld or fasten the sheet using approved procedures and materials for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel that compromises structural integrity under pressure. | Always confirm the material specification strictly adheres to the design's carbon steel grade and relevant ASTM standards. |
| Inadequate surface preparation leading to poor weld adhesion or corrosion. | Thoroughly clean and degrease the cutting and welding areas to ensure optimal bond strength and prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, High-temperature heat exchangers, Component manifolds for process control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||