Engineered for robust hydraulic systems, this 0.507" thick carbon steel stock sheet offers exceptional strength and reliability. Its substantial dimensions make it ideal for fabricating critical hydraulic components.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.507" |
| Length | 20" |
| Width | 21" |
A proven choice for industrial professionals, this 0.507-inch thick carbon steel stock sheet (20"x21") is manufactured to exacting standards for hydraulic applications. Its high tensile strength and yield strength ensure superior performance under extreme pressure and stress. The material's inherent toughness resists deformation and wear, making it suitable for hydraulic manifolds, pressure vessels, and structural supports within fluid power systems. Precise dimensions guarantee consistent fit and function in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all surfaces of the sheet and mating components thoroughly. 2. Accurately mark and cut the sheet to the required dimensions for fabrication. 3. Proceed with welding, machining, or forming processes according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel for high-pressure hydraulic applications. | Always select carbon steel specifically rated for hydraulic systems to ensure safety and longevity. |
| Inadequate surface preparation before welding or machining. | Thoroughly degrease and remove any mill scale or rust to ensure optimal joint integrity and machining accuracy. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Fabrication, Pressure Vessel Construction, Heavy-Duty Hydraulic Component Bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||