This high-strength 0.506" thick carbon steel stock sheet, measuring 29"x43", is engineered for critical hydraulic system components requiring exceptional durability and load-bearing capacity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.506" |
| Length | 29" |
| Width | 43" |
Specified by design engineers worldwide, this 0.506" thick carbon steel stock sheet offers superior tensile strength and impact resistance crucial for high-pressure hydraulic applications. Its precise dimensions of 29" in length and 43" in width ensure consistent material yield and suitability for fabrication of robust hydraulic manifold blocks, pump housings, and cylinder bodies. The material's inherent machinability and weldability facilitate complex component manufacturing while maintaining structural integrity under extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free of contaminants before fabrication. 2. Precisely cut to required dimensions using appropriate machining techniques. 3. Perform necessary welding or joining operations according to engineering drawings and material specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or HAZ. | Employ high-quality, sharp cutting tools and appropriate feed rates to maintain material integrity and prevent heat-affected zone issues. |
| Inadequate surface preparation before welding, resulting in weak joints. | Thoroughly clean and degrease all mating surfaces to be welded to ensure optimal bond strength and prevent porosity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Pump Housings, Hydraulic Cylinder Barrels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||