This premium brass stock sheet, precisely manufactured to 0.506" thickness, 17" width, and 19" length, offers superior thermal conductivity and corrosion resistance for demanding HVAC applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.506" |
| Length | 17" |
| Width | 19" |
Built to exacting engineering tolerances, this brass stock sheet is engineered for optimal performance in thermal transfer systems. Its substantial 0.506" thickness combined with a 17" x 19" dimension ensures structural integrity and efficient heat dissipation. The inherent properties of brass, including excellent thermal conductivity (approximately 120 W/m·K) and resistance to corrosion, make it the material of choice for high-efficiency heat exchangers, robust boiler components, and specialized HVAC ductwork requiring durability and long service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of contaminants. 2. Accurately cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using approved welding, brazing, or mechanical fastening methods suitable for brass.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible brazing or welding filler metals that can compromise the joint strength and corrosion resistance. | Always consult material compatibility charts and use filler metals specifically recommended for brass in HVAC applications. |
| Inadequate surface preparation leading to poor adhesion or weak joints. | Thoroughly clean and degrease all surfaces to be joined before proceeding with any fastening or joining process. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heat Exchanger Components, HVAC System Fabrication, Custom Thermal Management Solutions.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||