This high-strength carbon steel stock sheet is precisely manufactured to meet the rigorous demands of hydraulic systems. Its substantial thickness ensures exceptional load-bearing capacity and resistance to deformation under pressure.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.504" |
| Length | 28" |
| Width | 32" |
Engineered for reliability and performance, this carbon steel stock sheet offers superior tensile strength and a robust yield point, essential for high-pressure hydraulic components. With a precise thickness of 0.504 inches and dimensions of 28 inches by 32 inches, it provides ample material for fabrication of critical hydraulic manifolds, pump housings, and valve bodies. The inherent toughness of carbon steel allows for excellent machinability while maintaining structural integrity under extreme operational conditions, ensuring long-term service life and system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with surrounding hydraulic fluids and components. 2. Ensure all cutting, drilling, and shaping operations are performed to precise engineering drawings. 3. Apply appropriate protective coatings or treatments as per system design specifications to prevent corrosion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using underspecified or lower-grade steel for hydraulic applications. | Always utilize certified carbon steel with documented mechanical properties that meet or exceed the required specifications for the intended hydraulic pressure and stress loads. |
| Inadequate post-machining surface treatment leading to premature corrosion. | Implement thorough cleaning and apply approved rust inhibitors or protective coatings immediately after machining to safeguard against environmental degradation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pump and Motor Housings, Heavy Equipment Hydraulic Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||