This premium brass stock sheet offers superior corrosion resistance and excellent machinability, ideal for fabricating robust hydraulic components. Its precise dimensions ensure reliable performance in high-pressure fluid power systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.504" |
| Length | 12" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.504" thick brass stock sheet measures 12" in width and 38" in length, conforming to stringent industry standards for hydraulic applications. Engineered from high-grade brass alloy, it exhibits exceptional strength, durability, and resistance to a wide range of hydraulic fluids and environmental conditions. The material's inherent non-sparking properties and excellent thermal conductivity make it suitable for applications where safety and heat dissipation are critical. Its consistent dimensions and smooth surface finish facilitate precise machining and assembly, ensuring the integrity and longevity of hydraulic manifolds, valve bodies, and specialized fittings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces of the brass sheet and receiving component thoroughly to remove any debris or contaminants. 2. Apply an appropriate sealant or gasket material to the cleaned surfaces as per system design specifications. 3. Securely fasten the brass sheet using specified fasteners, ensuring even torque distribution to avoid deformation or leaks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible sealants that degrade brass over time. | Consult the hydraulic system's fluid compatibility chart and select sealants specifically rated for brass and the operating fluid. |
| Over-tightening fasteners, leading to material stress or cracking. | Adhere to specified torque values during installation, using a calibrated torque wrench to ensure even and controlled tightening. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Valve Bodies, High-Pressure Fluid Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||