This robust carbon steel stock sheet, precisely manufactured, is engineered for demanding pulling and lifting applications. Its substantial thickness and dimensions ensure exceptional load-bearing capacity and structural integrity for critical operations.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.503" |
| Length | 46" |
| Width | 26" |
Built to exacting engineering tolerances, this 0.503-inch thick carbon steel stock sheet offers superior tensile strength and yield strength, crucial for high-stress pulling and lifting scenarios. Its dimensions of 46 inches in length and 26 inches in width provide a generous surface area for mounting, fabrication, or direct application as a reinforcement plate. The inherent durability of carbon steel resists deformation and wear under significant mechanical loads, making it ideal for rigging, heavy machinery, and structural support components within industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean, dry, and free of contaminants. 2. Position the stock sheet precisely according to design specifications. 3. Secure the stock sheet using appropriate fasteners, ensuring even load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or improper fastening patterns. | Always consult load charts and engineering drawings to select fasteners of adequate size and grade, and follow recommended spacing and torque specifications. |
| Neglecting surface preparation before installation. | Thoroughly clean the mounting surface to remove rust, paint, oil, or debris to ensure optimal contact and prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty rigging plates, Reinforcement for lifting points, Structural components in winches and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||