This 0.503-inch thick carbon steel stock sheet, measuring 35 by 15 inches, is engineered for robust hydraulic system components requiring superior strength and resilience.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.503" |
| Length | 35" |
| Width | 15" |
Manufactured under strict quality controls, this 0.503" thick carbon steel stock sheet offers exceptional tensile strength and yield strength, essential for high-pressure hydraulic applications. Its precise dimensions of 35" in length and 15" in width ensure consistent performance and ease of fabrication for critical hydraulic manifold blocks, pump housings, and structural support elements. The material composition is optimized for weldability and resistance to deformation under extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free of contaminants. 2. Precisely cut to required dimensions using appropriate machining tools. 3. Prepare edges for welding or fastening as per hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect grade steel for hydraulic components. | Always verify material specifications and dimensions against engineering drawings for hydraulic systems. |
| Inadequate edge preparation before welding or assembly. | Thoroughly clean and bevel edges to ensure strong, leak-free hydraulic connections and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Pump and Motor Housings, Cylinder Components, Pressure Vessel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||