This heavy-duty carbon steel stock sheet is engineered for robust hydraulic system components. Its substantial thickness and precise dimensions ensure exceptional structural integrity and performance under extreme pressure.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.498" |
| Length | 38" |
| Width | 37" |
Precision-manufactured to tight tolerances, this 0.498-inch thick carbon steel stock sheet measures 38 inches in length and 37 inches in width. Composed of high-strength carbon steel, it offers excellent tensile strength, yield strength, and weldability, making it ideal for fabricating critical hydraulic manifold blocks, heavy-duty cylinder components, and structural supports. The material's inherent toughness and resistance to deformation under load ensure reliable performance in high-pressure hydraulic environments, contributing to the longevity and safety of fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects before cutting. 2. Precisely cut sheet to required component dimensions using appropriate cutting tools. 3. Prepare edges for welding or machining as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade steel for critical hydraulic components. | Always select steel stock sheet that meets or exceeds the specified material grade and thickness for the intended hydraulic application's pressure and stress requirements. |
| Inadequate edge preparation before welding. | Ensure proper beveling and cleaning of cut edges to achieve strong, defect-free welds that can withstand high hydraulic pressures. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Cylinder Components, Heavy-Duty Hydraulic Frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||