This robust 0.496-inch thick carbon steel stock sheet, measuring 42 inches by 31 inches, is engineered for superior performance in high-pressure hydraulic systems. Its substantial gauge ensures exceptional strength and longevity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.496" |
| Length | 42" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.496" thick carbon steel stock sheet offers exceptional mechanical properties vital for hydraulic system integrity. Its robust composition provides superior tensile strength and yield point, resisting deformation under extreme pressure and operational stress. The 42" x 31" dimensions allow for versatile fabrication of critical hydraulic components such as manifold blocks, pressure vessels, and structural support elements. This material exhibits excellent weldability and machinability, facilitating complex designs and integration into existing hydraulic infrastructure. Its inherent durability ensures extended service life in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare edges for fabrication, ensuring clean and precise cuts according to design. 3. Weld or fasten to adjacent components using appropriate procedures and materials for carbon steel in hydraulic applications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel without verifying its suitability for high-pressure hydraulic environments. | Always confirm the specific grade and properties of carbon steel are adequate for the intended hydraulic pressure and operational conditions. |
| Inadequate edge preparation prior to welding or fastening, leading to structural weaknesses. | Thoroughly clean and bevel edges as per welding codes and fabrication drawings to ensure full joint penetration and integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic manifold fabrication, Pressure vessel construction, Heavy-duty hydraulic system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||