This robust carbon steel stock sheet, measuring 0.494 inches thick by 16 by 15 inches, is engineered for critical pulling and lifting operations. Its substantial gauge and high-strength material ensure reliable performance under extreme loads.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.494" |
| Length | 16" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.494" thick carbon steel stock sheet offers exceptional mechanical properties crucial for heavy-duty pulling and lifting applications. Composed of high-grade carbon steel, it exhibits superior tensile strength and shear resistance, ensuring integrity under significant stress and dynamic forces. The 16" x 15" dimensions provide a substantial surface area for integration into custom rigging solutions, structural supports, and specialized equipment. Its inherent toughness and resistance to deformation make it ideal for environments demanding consistent, reliable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Align the sheet precisely with the intended mounting points. 3. Securely fasten using appropriately rated hardware (e.g., heavy-duty bolts, welding) based on application load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners that are rated for the maximum anticipated load of the pulling or lifting operation and are compatible with carbon steel. |
| Inadequate surface preparation before attachment. | Thoroughly clean and degrease mounting surfaces to ensure optimal contact and prevent slippage or premature wear. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch drum fabrication, Heavy-duty lifting point reinforcement, Structural components for material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||