This robust 0.491-inch thick Nylon stock sheet offers exceptional durability and performance in challenging heating and cooling systems. Its material properties make it ideal for a variety of industrial applications requiring reliable and long-lasting components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.491" |
| Length | 48" |
| Width | 12" |
Designed for demanding industrial environments, this 0.491" thick Nylon stock sheet measures 48" in length and 12" in width. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical resistance, ensure optimal performance in HVAC systems, ductwork, and thermal insulation applications. Its ability to withstand moderate temperatures and resist moisture absorption makes it a superior choice for components exposed to fluctuating environmental conditions, providing a cost-effective and reliable solution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastic. 3. Secure the cut sheet using mechanical fasteners (e.g., screws, rivets) or industrial-grade adhesives suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or uneven edges. | Employ specialized plastic-cutting blades or routers for clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracks or deformation in the Nylon sheet. | Use washers and hand-tighten fasteners, or utilize self-tapping screws designed for plastic to prevent over-compression. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Duct Lining and Insulation, Thermal Barrier Components, Fan Shroud and Housing Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||